Production UTV Racing
TDRA hosts production UTV races as part of our series, below is the minimum list of safety requirements. A fully fabricated and welded cage is STRONGLY recommended.
6 Point Aftermarket Roll-Cage. (No stock roll cages allowed)
Side Panels / Doors Required (Doors must be secured to prevent from popping open, welded, or double latches)
Window Nets Required
Roof Panel Required
One 2.5lb Fire Extinguisher Mounted On UTV w/ Quick Release.
5- Point Seat Belts Required 2” or 3” Wide Belts OK.
One Piece Fire-Suit Required
Helmet w/ DOT or Snell Decal. Eye Protection Required
Numbers On Both Sides Of Vehicle. Minimum 8” Tall Number.
Rear-Facing Amber light mounted as high as possible, must be wired to come on with the ignition.